1. General Safety Precautions
- Training and Instructions: All personnel must be trained on the properties of chemicals, usage instructions, and emergency procedures.
- Labeling and MSDS (Material Safety Data Sheet): Label all chemical containers correctly and keep MSDSs accessible.
- Proper Storage: Store chemicals in their original containers, in a well-ventilated, cool, and dry area. Some chemicals (e.g., sodium hypochlorite) are sensitive to light and heat.
-
Mixing Risks: Do not mix chemicals randomly. Especially when chlorine and acidic solutions combine, toxic gases can be released.
2. Personal Protective Equipment (PPE)
- Gloves: Use chemical-resistant nitrile or PVC gloves.
- Eye Protection: Use safety goggles or a face shield against chemical splashes.
- Clothing: Long-sleeved workwear or chemical-resistant apron.
- Footwear: Chemical-resistant boots.
- Respiratory: Appropriate masks for dusty or gaseous chemicals (e.g., dust mask, gas filter).
3. Operation and Handling Safety
- Dosing: Use chemicals at recommended concentrations and methods.
- Mixing and Dissolving: When preparing chemical solutions, always add chemical to water, not water to chemical. This prevents explosions and splashes.
- Ventilation: The area must be well-ventilated, especially when gases like chlorine and ozone are used.
4. Emergency Procedures
-
Eye or Skin Contact:
- Rinse with plenty of water for at least 15 minutes.
- Seek medical attention if necessary.
- Inhalation: Go to fresh air and seek medical help if necessary.
- Ingestion: Do not try to vomit; contact emergency services and show them the chemical's MSDS.
-
Spill:
- Clean up small spills with an absorbent appropriate for the chemical type.
- For large spills, evacuate the area, secure the surroundings, and notify authorities.
5. Waste and Environmental Safety
- Neutralize chemical waste properly or hand it over to licensed companies.
- Do not discharge directly into sewers or natural water sources.
- Empty packaging completely, leave the label visible, and recycle or dispose of appropriately.
6. Recommendations for Specific Chemicals
- Chlorine (sodium hypochlorite, gas chlorine): Corrosive and respiratory irritant; good ventilation and face protection are essential.
- Acids (sulfuric, hydrochloric): Corrodes metal and skin; be careful when diluting with water.
- Bases (sodium hydroxide, lime): Serious risk of skin and eye irritation.
- Coagulants (aluminum sulfate, iron salts): Can be irritating if inhaled as dust.
https://eshop.bogaziciendustriyel.com.tr/products/dosatron-d9wl3000ieaf
https://eshop.bogaziciendustriyel.com.tr/products/dosatron-d30wl5000af
https://eshop.bogaziciendustriyel.com.tr/products/dosatron-d3wl3000af
https://eshop.bogaziciendustriyel.com.tr/products/dosatron-d3wl3000ieaf
You can contact us for technical support on solutions suitable for your business.
